Wind Table Variations

[Dobbs]

Wind Table - Ocean.pdf

Wind Table - Coastal.pdf

Wind Table - Shifting.pdf

THESE TABLES HAVE ERRORS. THE CORRECTED ONES ARE AT POST #9.

Here are some wind tables I developed. I use a plus and minus chit from the original game wind chits as well as one clockwise and one counter-clockwise chit. I roll at the start of each turn before cards are chosen.

I felt there needed to be three different "styles" of wind, for the open ocean, near coastal, and bays or headlands where the wind is always shifting.

My idea is to make the wind able to wander, but always trend toward the speed and direction that it was at the start of the game.

For wind speed, if an increase or decrease is rolled, the appropriate marker is placed on the Wind Gauge. On subsequent turns, if the same effect is rolled, the speed changes and the marker is removed. If the opposite is rolled, nothing happens and the marker is removed from the Wind Gauge. If No Effect is rolled and a chit is out, the chit stays. If the wind speed increases from the speed at the start of the engagement, a modifier of -1 is added to the die roll each turn. If the wind speed decreases from the speed at the start of the engagement, a modifier of +1 is added to the die roll each turn.

For wind direction, if a wind shift is rolled, the appropriate marker is placed on the Wind Gauge. On subsequent turns, if the same effect is rolled, the direction changes and the marker is removed. If the opposite is rolled, nothing happens and the marker is removed from the Wind Gauge. If No Effect is rolled and a chit is out, the chit stays. If the wind direction shifts counter-clockwise from the direction at the start of the engagement, a modifier of +1 is added to the die roll each turn. If the wind direction shifts clockwise from the direction at the start of the engagement, a modifier of -1 is added to the die roll each turn.

I allowed for a greater range for the wind, but the tables work with just the regular three wind settings in the middle. I print the sheets out, cover the print with some self-laminate, and spray some adhesive on the back to attach them to a bit of cardboard or craft foam.