Results 1 to 39 of 39

Thread: How To Rig a SGN ship, the paint brush method

  1. #1
    First Naval Lord
    United States

    Join Date
    Nov 2011
    Location
    Colorado
    Log Entries
    1,551
    Name
    Keith

    Default How To Rig a SGN ship, the paint brush method

    Now that I've shown you guys the finished results, I thought it was time to show you a quick How To on the method.

    To start with, I should make clear that this method does not require any stretch, tying or knotting. As such, it does not look as authentic or add very much strength to the miniature. However, it is much quicker and requires almost no skill or superior eye sight ;)

    The whole method revolves around the material used as the cordage. It is simply a house hold paint brush:



    Clip some of the bristles off as close to the base of the bush as you can. These individual bristles are what you are going to use for rigging the ship.





    Use a permanent marker to color the bristles the color you need, I just use black. The marker works really well as it does not add any thickness to the bristles. To speed things up, clip and color a dozen or so bristles at one time.

    The next step is to determine where you are going to place your rigging and measure the length that you will need the bristle to be.



    I like to use a clear ruler as it allows me to see through it to the points I want to attach my rigging.

    The next step is to simply cut the bristle to the correct length.



    I then pick up the bristle with my tweezers and dip each end into some PVA (Elmer's) white glue. The photo is not very good, but you can just make out the two little blobs of white glue on the ends of the bristle.



    After that, just simply place the bristle onto the ship with each end on the points you measured for earlier. Sorry, no pick of that since I did not have a third hand to hold the camera (just using the cell phone for this one)! Sometimes you might find it easier to place glue on only one end of the bristle and glue on the ship location for the other end. At times, I've even put the glue for both ends directly on the ship and no on the bristle at all. This works well for when you have to thread a bristle through openings in the sails or such.

    And the end results:








  2. #2
    Able Seaman
    United States

    Join Date
    Sep 2013
    Location
    Illinois
    Log Entries
    60
    Blog Entries
    7
    Name
    David (Dave)

    Default

    Very nice "How To"

  3. #3
    Midshipman
    Scotland

    Join Date
    Dec 2011
    Location
    Highland
    Log Entries
    289
    Name
    Gaz

    Default

    Looking good

  4. #4
    Admiral of the White
    Admiral
    United States

    Join Date
    Apr 2013
    Location
    Wisconsin
    Log Entries
    4,568
    Name
    Jim

    Default

    Thanks for the "how to". I can see how this method might be less intimidating for folks.

  5. #5

    Default

    Perfect, First Sea Lord.

    I first thought you took a thin steel wire, but brush hairs.

    Can't wait to leave Toulon harbour with my ships.

  6. #6
    Retired Admiral of the Fleet
    Admiral
    United States

    Join Date
    Jan 2013
    Location
    Chicago/Bloomington IL
    Log Entries
    5,095
    Name
    Eric

    Default

    Elegantly simple and effective. Nice job, Keith.

    A little bit if effort really does improve the look of the Ares ships.

  7. #7
    Midshipman
    UK

    Join Date
    May 2013
    Location
    Bristol
    Log Entries
    192
    Name
    Chris

    Default

    what a "stroke" of genius!

    I will be using this technique when i get mine. Thanks for sharing this technique.

  8. #8
    First Naval Lord
    United States

    Join Date
    Nov 2011
    Location
    Colorado
    Log Entries
    1,551
    Name
    Keith

    Default

    The problem with thin wire is once it is bent or curved, it will never be straight again. The bristles have some elasticity to them, so if you bend it while working with it, it will snap back straight. They can be kinked, so some care is needed to to bend them to that point however.

  9. #9
    Master & Commander
    United States

    Join Date
    Mar 2013
    Location
    Washington
    Log Entries
    1,601
    Name
    Paul

    Default

    Awesome Keith. Thank you for the easy method.

  10. #10
    Able Seaman
    United States

    Join Date
    Sep 2013
    Location
    Illinois
    Log Entries
    60
    Blog Entries
    7
    Name
    David (Dave)

    Default

    I was so interested in this concept, that I visited my local ACE Hardware earlier this evening, and found a 1.5inch trimming brush that has BOTH black and tan bristles. Cost, about $6.00.

    Name:  IMG_1595S.jpg
Views: 8472
Size:  514.4 KB

  11. #11

    Default

    It never ceases to amaze me the level of creativity and ingenuity of some of the members here. Amazing, elegant and simple Keith!

  12. #12
    First Naval Lord
    United States

    Join Date
    Nov 2011
    Location
    Colorado
    Log Entries
    1,551
    Name
    Keith

    Default

    Quote Originally Posted by Berthier View Post
    It never ceases to amaze me the level of creativity and ingenuity of some of the members here. Amazing, elegant and simple Keith!
    I can't claim credit for this method. Zoe introduced it to us on the Wings side of the house for rigging those planes.

  13. #13
    2nd Lieutenant
    UK

    Join Date
    Feb 2013
    Location
    Dorset
    Log Entries
    961
    Name
    Rory

    Default

    Hi Keith,
    I have just found this thread. I do like this idea. But I don't think it would add strength to the ship model.
    ( by the way, off thread I'm not getting thread marks in my in-box over the last 3 days. Help!)
    Be safe
    Rory

  14. #14

    Default

    Has anyone thought about sticking a pin vertically into the top of the masts with a pendant, etc. on it?

    Forget the above. They don't make stick pins small or thin enough to work.
    Last edited by Gunner; 01-15-2014 at 17:41.

  15. #15

    Default

    My first thought would be to use super glue. Why Elmer's and not super glue?

  16. #16

    Default

    Hajj -

    I know this is an old thread, but could you repost the pics of your ships here? I really like the amount and type of rigging you did, figured those graphics would always be around!

    Would like to see them again so I can start looking to do this to my ships when they arrive!

  17. #17
    First Naval Lord
    United States

    Join Date
    Nov 2011
    Location
    Colorado
    Log Entries
    1,551
    Name
    Keith

    Default

    Okay, I've restored the images in the first post.
    Quote Originally Posted by Cool Breeze View Post
    I just didn't want to be seen as the, "Thread Pirate Roberts" and get too far off topic.

  18. #18

    Default

    Thank you, much appreciated!

  19. #19
    Able Seaman
    United States

    Join Date
    Dec 2013
    Location
    OR
    Log Entries
    98
    Name
    Alyssa

    Default

    Oh my word that looks fantastic!

  20. #20
    2nd Lieutenant
    Serbia

    Join Date
    Nov 2013
    Location
    Србија
    Log Entries
    539
    Name
    Heмaњa

    Default

    Really great!

  21. #21

    Default

    Maybe this thread should be a sticky?

  22. #22
    First Naval Lord
    United States

    Join Date
    Nov 2011
    Location
    Colorado
    Log Entries
    1,551
    Name
    Keith

    Default

    Quote Originally Posted by DeRuyter View Post
    Maybe this thread should be a sticky?
    Smart thinking... stuck.
    Quote Originally Posted by Cool Breeze View Post
    I just didn't want to be seen as the, "Thread Pirate Roberts" and get too far off topic.

  23. #23
    Ordinary Seaman
    United States

    Join Date
    Feb 2014
    Location
    nebraska
    Log Entries
    46
    Name
    john

    Default

    I'll just use 009 guitar strings, adds strength and is not too thick. Some of those ropes are 8" thick or more.

  24. #24
    2nd Lieutenant
    Serbia

    Join Date
    Nov 2013
    Location
    Србија
    Log Entries
    539
    Name
    Heмaњa

    Default

    Keith,

    it would be nice if you could post more detailed close-ups (of already rigged ships), as some kind of mast-by-mast rigging instruction. I believe it would be great and much appreciated help for future riggers.

  25. #25
    First Naval Lord
    United States

    Join Date
    Nov 2011
    Location
    Colorado
    Log Entries
    1,551
    Name
    Keith

    Default

    I'm no expert rigger, but his is the diagram I used:



    It is taken from this larger thread. I basically did all of the red lines that I could for each of the minis.

    I own the Langton painting and rigging book, but for the life of my I can't find it. If you are wanting to rig your ships "historically", I'd use the book. If you just want better looking game pieces, then by brush and diagram method is a good option.
    Quote Originally Posted by Cool Breeze View Post
    I just didn't want to be seen as the, "Thread Pirate Roberts" and get too far off topic.

  26. #26
    Ordinary Seaman
    Sweden

    Join Date
    Mar 2014
    Location
    Stockholm
    Log Entries
    29
    Name
    Pete

    Default

    Thanks for the contribution. I will start rigging my ships soon.

  27. #27
    Admiral. R.I.P.
    Admiral
    UK

    Join Date
    Apr 2013
    Location
    Norfolk
    Log Entries
    6,691
    Name
    David

    Default

    Using bristles from a paintbrush is a good idea. Has anyone tried using human hair?

  28. #28
    Midshipman
    Germany

    Join Date
    Jul 2014
    Location
    NRW
    Log Entries
    155
    Name
    Jörg

    Default

    As i have nearly a bald head i din't want to try it with the few remaining hair, and i think my chest hair, even when it is long enough, is to curly.

  29. #29
    Midshipman
    Australia

    Join Date
    Feb 2014
    Location
    NSW
    Log Entries
    180
    Name
    Brad

    Default

    Been trolling through my files and have attached a couple of pics with rigging guides from the 19th century. Note that both these images show standing rigging, i.e., no sails shipped, not all of the running rigging when the ship was at sea. I've got them if anyone is interested. Let me know.

    The image you posted only shows the forestays. It is important to include the shrouds usually rigged with ratlines, as these are what keep the aft tension on the masts to balance out the forestays.

    It is also worth noting that with regard to the shrouds, at this scale the ratlines become invisible so they can be left out without detriment to the model.

    Hope that helps!

    Cheers
    Attached Images Attached Images   

  30. #30
    2nd Lieutenant
    UK

    Join Date
    Feb 2013
    Location
    Dorset
    Log Entries
    961
    Name
    Rory

    Default

    Hi Brad,
    I think you are right about what you can see and not see on 1-1200/1-1000 scale ships. But the rat-lines is the one piece of rigging I always would do, as it give strength to the masts of the model, as in real life. I spent a long time doing a "How to rig model ships on this site", but it was lost in the BIG HACH some months ago. It is now all on Vols Blog. He kindly put it all of it on his blog for me. He has links to it on this site and TMP site too. Langton's book on rigging and painting is a must have. Most of the best rigged photo's on this site are all or in part, from his book. For the cost of one ship, it is a very good buy. If you think I'm wrong look at Jim's work.
    Be safe
    Rory

  31. #31
    Midshipman
    Australia

    Join Date
    Feb 2014
    Location
    NSW
    Log Entries
    180
    Name
    Brad

    Default Ratlines

    Hi Rory

    Thanks for the post mate.

    As the ratlines are only the footropes that are attached to the shrouds and not the shrouds themselves, I would have thought that the ratlines would not be that necessary.

    Ta for that. Maybe I will try the paint brush bristles for some rigging too.

    Cheers

  32. #32
    Ordinary Seaman
    Canada

    Join Date
    Dec 2014
    Location
    Ontario
    Log Entries
    30
    Name
    Colby

    Default

    Keith,

    Simply amazing, fantastic results.

    Thank you for sharing as always!


  33. #33
    Admiral of the White
    Admiral
    United States

    Join Date
    Apr 2013
    Location
    Wisconsin
    Log Entries
    4,568
    Name
    Jim

    Default

    If you want to try some rigging that's a bit more involved, but also significantly improves the structural integrity of your SoG ships (just like in real life), check out the step by step process Rory has posted up on Vol's blog:

    http://volsminiatures.blogspot.com/2...-guide-to.html
    http://volsminiatures.blogspot.com/2...ide-to_18.html
    http://volsminiatures.blogspot.com/2...ide-to_27.html
    http://volsminiatures.blogspot.com/2...ide-to_27.html

    Parts 2 and 3 cover most of the actual rigging.

  34. #34
    2nd Lieutenant
    UK

    Join Date
    Feb 2013
    Location
    Dorset
    Log Entries
    961
    Name
    Rory

    Default

    Quote Originally Posted by Iron Outlaw View Post
    Hi Rory

    Thanks for the post mate.

    As the ratlines are only the footropes that are attached to the shrouds and not the shrouds themselves, I would have thought that the ratlines would not be that necessary.

    Ta for that. Maybe I will try the paint brush bristles for some rigging too.

    Cheers
    Brad,
    You are right, The foot-ropes are only for the crew to get around the masts. But the stays the foot-ropes are on stopped sideward movement of the masts, so like in life, like in models.
    This should not be on this thread, Sorry! as it is about using brush bristles for rigging. I use them for smaller ships as there is no place to drill holes into the hull. So bristles for back-up for me.
    Be safe
    Rory
    Last edited by Devsdoc; 01-01-2015 at 20:17.

  35. #35
    Midshipman
    Denmark

    Join Date
    Feb 2016
    Location
    Copenhagen
    Log Entries
    186
    Blog Entries
    1
    Name
    Morten

    Default

    Yes...creative and very beautiful. Thanks
    ...put him in the brig until he's sober...

  36. #36
    Midshipman
    Poland

    Join Date
    Nov 2014
    Location
    Świętokrzyskie
    Log Entries
    231
    Name
    Kamil

    Default

    This is very helpful, Keith. Perhaps I try this method for my own fleet. Thanks

  37. #37
    Captain of the Fleet
    Captain
    UK

    Join Date
    Dec 2011
    Location
    South Glos
    Log Entries
    2,220
    Name
    Chris

    Default

    I use the brush method, you can se the results on the threads for Timoleon repaint and Hammerhead 2016

  38. #38
    Midshipman
    Poland

    Join Date
    Nov 2014
    Location
    Świętokrzyskie
    Log Entries
    231
    Name
    Kamil

    Default

    Thanks Chris. I just wonder about replacing Langtons ratlines. They are not available in my country, ordering them is worthwhile.

  39. #39
    Captain of the Fleet
    Captain
    UK

    Join Date
    Dec 2011
    Location
    South Glos
    Log Entries
    2,220
    Name
    Chris

    Default

    Quote Originally Posted by KDz View Post
    Thanks Chris. I just wonder about replacing Langtons ratlines. They are not available in my country, ordering them is worthwhile.
    I have used Langton ratlines on all my 74 SoL so far.
    They are not an exact fit but pretty close, you may have to glue onto the Bulwarks intead of the correct place, but I think they work pretty well.
    For the SOL you need PE01 which are the ratlines for Langtons 3 deckers, at £1.25 per ship very reasonable.
    I havent tried the smaller ships yet as not finished the SoL, but I believe the frigates will use PE2 or PE3 depending on the size while the sloops possibly PE5. I will post which one I start on my frigates.
    The down side is nothing to fit the Ares triple deckers so for those we have to waait for Keith, although I am going to give Langtons a call to see if he can help.
    Ill keep you posted

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •