Hello I share a mini tutorial on how to make anchors for ships. Applies to ships of Sail of Glory or any other scale. I hope it's ussefull.
Materials.
The materials used to make anchors are three:
1)Remains of matrix of ratlines or brass sails.
2)Staples. I use staples 22/6 DIN 7405
3)"Cancamos" . I put the name in Spanish because I dont know the tranlator in English, sorry.
Attachment 21804
First step. Flatten the "cancamo"
Attachment 21805
Second step. Cut the staple and a piece of brass. To use snips to cut metal.
Attachment 21806Attachment 21807Attachment 21808
Third step. To fix each parto of the anchor.
before, knotting a thread around the stem.
Attachment 21810
Use glue with cyanoacrylate.
Attachment 21811Attachment 21812
The anchor is finished !!!
Now you just have to paint it and put it on the boat.
Attachment 21813Attachment 21814
Tip: If the boat is very small is possible that the "cancamo" is very large. This usually occurs in frigates and ships of 64 guns. We can replace the "cancamo" for a piece of staples. I also recommend in some cases build anchor directly onto the hull.
It is a more or less cheap way to make anchors in reduced scales and the visual effect is acceptable.